EN
UA RU EN

Letres SPD-2 Dual-Channel Syringe Pump

Price: 35 900,00 ₴SKU: 100048
Availability: In stock
Quantity:

The Letres SPD-2 is a dual-channel syringe pump for simultaneously running two independent infusions. Each channel has separate settings for rate, volume, and delivery mode. The pump supports three infusion modes, 5–60 mL syringes, and a delivery accuracy of ±2% after calibration.

2 independent channelsTwo drugs at once
3 delivery modesInfusion modes
25 occlusion levelsLine pressure control
Battery operation ≥ 8 hRuns on battery
Syringes 5–60 mLCompatible sizes
Ukrainian-language interface UA menuDevice menu in Ukrainian
  • Description
  • Specifications
  • Configuration
  • Letres SPD-2 — a Dual-Channel Syringe Pump for Simultaneous Delivery

    The Letres SPD-2 is a dual-channel syringe pump for running two independent infusions at the same time in a single housing. Delivery parameters are set separately for each channel, allowing two drugs to be administered in parallel at different rates and volumes.

    The model supports three modes — rate, time, and dose — and works with 5–60 mL syringes. The main advantage of the SPD-2 is two full-featured channels without the need to install two separate single-channel pumps.

    SPD-2 features

    Two independent channels: both channels operate independently of each other — each can have its own syringe and its own infusion parameters, so two different delivery regimens run at the same time.

    Three infusion modes: the SPD-2 supports rate, time, and dose modes; this model does not have a sequential mode or a drug library.

    Syringes 5–60 mL: each channel supports sizes 5, 10, 20, 30, and 50/60 mL, so the two channels can work simultaneously with different volumes and delivery parameters.

    Accuracy ≤ ±2% after calibration: precise, dosed delivery is ensured for each channel once the installed syringe is correctly calibrated.

    25 occlusion control levels: 25 levels are available in the 20–160 kPa range, and the maximum occlusion pressure does not exceed 200 kPa.

    BOLUS and KVO for infusion control: bolus delivery, line purge, and keep-vein-open modes are provided after the main delivery is complete.

    For adults, children, and neonates: the SPD-2 is intended for different patient age groups, so a single model can be used across departments of different profiles.

    Extended battery operation: two 7.2 V / 2600 mAh batteries provide at least 8 hours of operation at a rate of 5 mL/h, which matters when transporting a patient and during temporary loss of mains power.

    What the facility gets

    Two independent channels in one housing
    The ability to administer two drugs at the same time
    Separate settings for each infusion
    Three basic delivery modes
    Operation with 5–60 mL syringes
    Accuracy ≤ ±2% after calibration
    25 occlusion control levels
    BOLUS and KVO
    Operation with adults, children, and neonates
    At least 8 hours of battery life at 5 mL/h

    Two Independent Infusions — One Pump

    The SPD-2 lets you replace two separate single-channel pumps with one dual-channel device while keeping independent control of each infusion. This is especially convenient at the patient's bedside, where several drugs are used at once and it is important to organize the workspace efficiently.

    Letres Company will help you choose an infusion equipment configuration for your department's needs — leave a request and we will prepare a commercial offer with the current price, kit, and delivery terms.

    Compare Infusion Equipment Models

    Choose a pump by infusion type, number of channels, and delivery modes.

    Volumetric Pump

    Syringe Pumps

    SPD-2 Current model2 independent channels — two simultaneous infusions, 3 modes
    • Type:syringe infusion pump, two channels
    • Patient categories:adults, children, neonates
    • Interface:Ukrainian-language
    • Delivery modes:rate, time, dose
    • Compatible syringes:5, 10, 20, 30, 50/60 mL
    • Flow rate:5 mL: 0.1–200.0 mL/h; 10 mL: 0.1–400.0; 20 mL: 0.1–800.0; 30 mL: 0.1–1200.0; 50/60 mL: 0.1–2000.0 mL/h; step 1 / 0.1 / 0.01 mL/h
    • Accuracy:delivery ≤ ± 2% after calibration; mechanical accuracy ≤ ± 1%
    • Infusion volume and time:volume 0.1–9999.9 mL (step 0.1 mL); time 00:00:01–99:59:59 (step 1 s / 1 min / 1 h)
    • BOLUS and KVO:BOLUS 1.0–50.0 mL (step 0.1 mL), bolus and purge rate up to 2000.0 mL/h; KVO 0.1–20 mL/h or the last delivery rate
    • Occlusion alarm:25 levels, 20–160 kPa (±15 kPa tolerance); maximum pressure 250 kPa
    • Dose mode parameters:patient weight, drug mass, and solution volume 0.1–999.9 (step 0.1)
    • Power supply:220 V, 50 Hz with protective grounding; maximum power 55 VA; consumption < 20 W; fuse T2A/250 V
    • Battery:two lithium-polymer 7.2 V / 2600 mAh batteries; ≥ 8 h at a rate of 5 mL/h; charging < 10 h (off), < 14 h (operating)
    • Classification:Class I with internal power source; type CF applied part; continuous operation; IPX4
    • Dimensions and weight:355 × 155 × 228 mm (excluding mounting bracket); 3.5 kg
    • Operating conditions:5…40 °C; humidity 15–95% non-condensing; pressure 70–106 kPa, altitude ≤ 3000 m
    Syringe pump 1 pc
    Power cord 1 pc
    Operating instructions (with warranty card) 1 pc
    Quality certificate 1 pc
    Packing list 1 pc
    INDIVIDUAL SELECTION

    We will find a solution for your facility

    We will help define the required specifications, choose the right equipment and agree on the best terms of cooperation.

    Related products

    Call Telegram Get a quote
    Telegram Viber