We will find a solution for your facility
We will help define the required specifications, choose the right equipment and agree on the best terms of cooperation.
The Letres HT6 is a semi-modular patient monitor for facilities that already need more than a basic multiparameter monitor offers, but do not yet require a fully modular expert-class system. In its standard configuration, the HT6 provides continuous monitoring of ECG, SpO₂, NIBP, RESP, PR, and temperature on two channels, and the platform can be configured for more complex departmental tasks with additional modules and technologies.
The 12.1″ display provides enough working space to show numeric values, waveforms, alarms, and trends at the same time, while keeping a compact monitor footprint. The HT6 is a good fit wherever broader functionality than a basic monitor is needed, without moving up to a more expensive expert platform.
More capability than a basic monitor
The HT6 is built as a platform for more flexible department equipping. In its standard configuration it monitors the patient's main vital signs: electrocardiogram and heart rate, saturation and pulse, non-invasive blood pressure, respiration, and temperature on two channels. This set makes it possible to use the monitor as a full continuous-monitoring system for adults, children, and neonates.
Unlike simpler multiparameter models, the HT6 is not limited to basic measurements only. The platform supports connecting additional functions for monitoring ventilation, hemodynamics, and anesthesia-related parameters — making the HT6 a logical next step for a department that already needs more advanced monitoring.
Standard monitoring
In its basic configuration, the HT6 monitors:
ECG / HR — electrocardiogram and heart rate;
SpO₂ / PR — blood oxygen saturation and pulse rate;
NIBP — non-invasive blood pressure measurement;
RESP — respiration rate monitoring;
TEMP 1 / TEMP 2 — simultaneous temperature monitoring on two channels.
Two temperature channels let staff monitor two temperature points simultaneously and track their trends.
The monitor also supports ST-segment analysis, arrhythmia analysis, an alarm system, trend review, and drug dose calculation.
Expanding the configuration for department needs
A strength of the HT6 is the ability to build the right configuration for a specific workstation right from the start. Depending on the task, you can add:
Sidestream EtCO₂ — for monitoring CO₂ concentration by sampling gas from the breathing circuit.
Mainstream EtCO₂ — for measuring CO₂ directly at the breathing circuit.
Masimo CO₂ — a premium solution for capnography monitoring.
IBP, 2 channels — for direct invasive monitoring of arterial or other intravascular pressure.
Masimo SpO₂ — an alternative pulse oximetry technology.
SunTech NIBP — a specialized non-invasive pressure module.
AG Masimo — anesthetic gas analysis.
BIS/CSM — monitoring anesthesia depth and sedation level.
C.O. — cardiac output monitoring.
A touchscreen, thermal printer, 12-lead ECG cable, wall mount, and mobile stand are also available. Additional functions are not included in the standard package — they are selected separately according to the facility's needs.
One platform for different equipping levels
The HT6 is convenient to use as a basis for standardizing department equipment. One monitor can be ordered in a basic configuration for standard monitoring, another with EtCO₂ and IBP for extended monitoring, and a third with anesthesia-related functions.
For the facility, this means being able to use a single equipment line for workstations of different complexity, without switching to a different monitor type each time.
What the facility gets
Broader functionality compared to basic monitors. The HT6 can be adapted for more advanced monitoring with EtCO₂, IBP, Masimo, AG, BIS/CSM, and C.O.
Rational use of budget. If a 15″ display is not a critical requirement, the HT6 lets you direct the budget straight to the clinical functions you actually need.
Two temperature channels. Allow monitoring two temperature points at the same time.
A configuration tailored to a specific department. The ICU, intensive care, operating room, or recovery ward can each get different equipping based on a single platform.
The option to use specialized technologies. Masimo and SunTech solutions are available if required by the facility's or the tender's requirements.
A full trend and clinical monitoring system. The monitor allows evaluation not only of current readings but also of their trends over time.
A built-in battery. The monitor continues operating during brief mains power loss and can be used while moving the patient within the facility.
Ukrainian-language interface. A menu in Ukrainian simplifies staff's everyday work.
Who the HT6 is suited for
The HT6 is worth choosing if standard ECG/SpO₂/NIBP monitoring is no longer enough and the facility plans to use capnography, invasive pressure, or more specialized technologies, but a fully modular expert system is not yet required.
A platform for extended monitoring without overpaying
The Letres HT6 lets you start with standard monitoring and build a configuration for the real needs of a specific department.
Letres Company will help you choose the optimal HT6 configuration — leave a request and we will prepare a commercial offer with the current price, available modules, package contents, and delivery terms.
| Main monitor unit | 1 pc |
| ECG cable (5-lead) | 1 pc |
| NIBP cuff and extension tube | 1 set |
| SpO₂ sensor | 1 pc |
| Temperature sensor | 1 pc |
| Power and grounding cable | 1 set |
| Disposable ECG electrodes | 5 pcs |
| XM750 | H8 | H9 | HT6You are viewing | HT8 | iHT6 | iHT8 | |
|---|---|---|---|---|---|---|---|
| Screen | 12,1″ | 12,1″ | 15″ | 12,1″ | 15″ | 12,1″ | 15″ |
| Type | multiparameter | multiparameter | multiparameter | semi-modular | semi-modular | expert-classfully modular | expert-classfully modular |
| Expansion options | 5 | 5 | 5 | 14 | 14 | 14 | 14 |
| Add-on configuration | at order, на заводі | at order, на заводі | at order, на заводі | anytime, without factory service | anytime, without factory service | anytime, without factory service | anytime, without factory service |
| Add-ons available | |||||||
| Invasive pressure (2-channel IBP) | option | option | option | option | option | option | option |
| Accurate NIBP (SunTech) | option | option | option | option | option | option | option |
| Capnography EtCO₂sidestream / mainstream | — | — | — | option | option | option | option |
| Capnography Masimo CO₂ | — | — | — | option | option | option | option |
| Anesthetic gas analysis (AG) | — | — | — | option | option | option | option |
| Anesthesia depth (BIS/CSM) | — | — | — | option | option | option | option |
| Cardiac output (C.O.) | — | — | — | option | option | option | option |
| Masimo SpO₂ | — | — | — | option | option | option | option |
| 12-lead ECG cable | — | — | — | option | option | option | option |
| Price from, UAH | 42 000 | 37 900 | 45 000 | 105 900 | 116 900 | 156 900 | 178 900 |
We will help define the required specifications, choose the right equipment and agree on the best terms of cooperation.